A nomogram based on contrast-enhanced ultrasound for evaluating the glomerulosclerosis rate in transplanted kidneys.

Background: A high rate of glomerulosclerosis serves as an important signal of poor response to treatment and a high risk of disease progression or adverse prognosis in transplanted kidneys. We hypothesized that contrast-enhanced ultrasound (CEUS) could serve as a novel imaging biomarker in the early prediction of glomerulosclerosis rate by evaluating renal allograft microcirculation. Methods: A retrospective analysis was performed on 143 transplanted kidney recipients with confirmed pathology, including 100 in the training group and 43 in the validation group. All patients underwent conventional ultrasound (CUS) and CEUS examinations. The patients were divided into two groups: those with >50% glomerulosclerosis and those with ≤50% glomerulosclerosis. The nomograms derived from independent predictors identified by multivariate logistic analysis were assessed using receiver operating characteristic (ROC) curve analysis, 1,000 bootstrap resamples, calibration curves, and decision curve analysis (DCA). Results: The patients with >50% glomerulosclerosis and those with ≤50% glomerulosclerosis showed statistically significant differences in CEUS parameters, including in peak intensity (PI) (25 vs. 30; P<0.001), absolute time to peak (ATTP) (10 vs. 9; P=0.004), and time to peak (TTP) (22 vs. 19.5; P=0.026). Multivariate analysis revealed that PI [odds ratio (OR) =0.852; 95% confidence interval (CI): 0.737-0.986], peak systolic velocity (PSV) of the interlobar artery (OR =0.850; 95% CI: 0.758-0.954), cortical echogenicity (OR =38.429; 95% CI: 3.695-399.641), and time since transplantation (OR =1.017; 95% CI: 1.006-1.028) were independent predictors of whether the glomerulosclerosis rate was >50% and were incorporated into the construction of a nomogram. The area under the curve (AUC) of the nomogram in the training and validation groups was 0.914 (95% CI: 0.840-0.960) and 0.909 (95% CI: 0.781-0.975), respectively, with a bootstrap resampling AUC of 0.877. The calibration curve and DCA confirmed the diagnostic performance of the nomogram model. Conclusions: The nomogram, which combined CUS, CEUS, and clinical indicators, exhibited notable predictive efficacy for the glomerulosclerosis rate in transplanted kidneys, thereby demonstrating the potential to improve clinical decision-making.

Complete genome sequence of a novel mitovirus isolated from the fungus Fusarium oxysporum f. sp. ginseng causing ginseng root rot.

A novel mitovirus, tentatively designated as "Fusarium oxysporum mitovirus 2" (FoMV2), was isolated from the pathogenic Fusarium oxysporum f. sp. ginseng strain 0414 infecting Panax ginseng. The complete genome of FoMV2 is 2388 nt in length with a GC content of 30.57%. It contains a large open reading frame (ORF) encoding a putative RNA-dependent RNA polymerase (RdRp) of 713 amino acids with a molecular weight of 83.05 kDa. The sequence identity between FoMV2 and Botrytis cinerea mitovirus 8 and Fusarium verticillioides mitovirus 1 was 87.94% and 77.85%, respectively. Phylogenetic analysis showed that FoMV2 belongs to the genus Unuamitovirus in the family Mitoviridae. To the best of our knowledge, this is the first report of an unuamitovirus isolated from F. oxysporum f. sp. ginseng causing ginseng root rot.

Creation of Wood-Based Hierarchical Superstructures via In Situ Growth of ZIF-8 for Enhancing Mechanical Strength and Electromagnetic Shielding Performance.

Given the escalating prevalence of electromagnetic pollution, there is an urgent need for the development of high-performance electromagnetic interference (EMI) shielding materials. Herein, wood-based electromagnetic shielding materials have gained significant popularity due to their exceptional performance as building materials. In this study, a novel wood-based composite with electromagnetic shielding properties is developed. Through the in situ growth of zeolitic imidazolate framework-8 (ZIF-8) crystals on wood fibers, coupled with uniform integration of carbon nanotubes (CNTs), a multifunctional composite named ZIF-8/Poplar-CNT composite is synthesized via a one-step thermoforming process. The incorporation of CNTs endows the composites with excellent EMI shielding effectiveness (EMI SE). Among these elements, despite ZIF-8 crystals not possessing intrinsic electromagnetic shielding functionality, their distinctive dodecahedral structure proves adept at scattering and reflecting electromagnetic waves within the composites, further improving the electromagnetic shielding effect. Hence, the ZIF-8/Poplar-CNT composite (56.95 dB) has ≈10 dB higher EMI SE compared to that of the composites without ZIF-8 crystals. Meanwhile, ZIF-8 crystals endow the materials with excellent tensile strength (54.84 MPa, enhanced by 4 times). Moreover, the introduction of Zn2+ provides superior antibacterial properties. The potential applications of ZIF-8/Poplar-CNT composites extend to diverse areas such as building decoration, electronic products, and medical equipment.

Research on the deformation laws of buildings adjacent to shield tunnels in clay strata.

Earth pressure shields are widely used in tunnel construction due to their low environmental impact and mechanized operations. However, ensuring the stability of the excavation surface during the construction process is crucial. Any instability in the excavation surface can lead to soil destruction, such as body collapse or surface uplift. Additionally, the tunneling process can cause deformation disturbances to nearby buildings. In the case of Beijing Metro Line 17, detailed survey data and construction monitoring data were collected through field surveys and tests. The study combined theoretical analysis and numerical simulations to investigate the impact of shield tunneling in clay layers on neighboring buildings. The focus was on analyzing the physical deformation and the response law of influencing factors, such as stratum parameters and engineering effects on surface settlement, building inclination, and distortion. Furthermore, sensitivity analysis of the deformation impact was conducted, and corresponding measures for deformation control were proposed.

Cytokines: The links between bone and the immune system.

Osteoporosis results from an imbalance in a highly balanced physiological process called bone remodeling, in which osteoclast-mediated bone resorption and osteoblast-mediated bone formation play important roles. Osteoimmunology is a newly discovered interdisciplinary research field that focuses on the relationship between bone and the immune system. Specifically, bone and the immune system interact through cytokines, immune cells secrete cytokines, and cytokines finely regulate bone metabolism by mediating the differentiation and activity of osteoclasts and osteoblasts. Therefore, understanding the influence of cytokines on bone metabolism is conducive for the development of novel targeted drugs against immune-related bone diseases. This review summarizes the pathophysiological functions of various common cytokines in bone and discusses the potential clinical value of multiple cytokines in immune-mediated bone diseases.

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules.

Wood is one of the most popular materials for construction purposes because of its environmentally friendly and sustainable characteristics. However, the use of wood is constrained by the lengthy time it takes for trees to mature. Consequently, fast-growing wood species have become popular as substitute options due to their ability to rapidly reach maturity and high yields. Although the problem of low density and strength has been effectively addressed in recent years by densifying wood, the problem of large thickness swelling due to moisture and water absorption has limited its application. Therefore, we reported an effective modification strategy to overcome the thickness swelling issue of densified wood by preparing a cellulosic reinforced material through the synergistic action of alkaline chemical pretreatment, multi-step cyclic impregnation and high-temperature densification. The results showed that the alkaline chemical pretreatment was effective for removing a large amount of lignin and hemicelluloses, creating a large number of hydrogen bonds among the remaining strong celluloses. The impregnated sodium silicate solution bonded celluloses tightly, and the densification treatment contributed to the production of Si-O-Si structure, forming the shuttle hybridized structure through Si-O-C bonds. The hardness, flexural strength, elastic modulus, and compressive strength of the modified wood increased by 3.9, 6.0, 3.4 and 28.2 times, respectively. In addition, 0 % thickness swelling for 30-day moisture absorption and 1.0 % thickness swelling for 72-hour water absorption were achieved, realizing super dimensional-stable poplar structures. Furthermore, the high-performance densified wood prepared by this method has excellent fire and mildew resistance properties, which lays the foundation for the application of fast-growing wood in outdoor engineering structures.

Single-cell profiling of the pig cecum at various developmental stages.

The gastrointestinal tract is essential for food digestion, nutrient absorption, waste elimination, and microbial defense. Single-cell transcriptome profiling of the intestinal tract has greatly enriched our understanding of cellular diversity, functional heterogeneity, and their importance in intestinal tract development and disease. Although such profiling has been extensively conducted in humans and mice, the single-cell gene expression landscape of the pig cecum remains unexplored. Here, single-cell RNA sequencing was performed on 45 572 cells obtained from seven cecal samples in pigs at four different developmental stages (days (D) 30, 42, 150, and 730). Analysis revealed 12 major cell types and 38 subtypes, as well as their distinctive genes, transcription factors, and regulons, many of which were conserved in humans. An increase in the relative proportions of CD8 + T and Granzyme A (low expression) natural killer T cells (GZMA low NKT) cells and a decrease in the relative proportions of epithelial stem cells, Tregs, RHEX + T cells, and plasmacytoid dendritic cells (pDCs) were noted across the developmental stages. Moreover, the post-weaning period exhibited an up-regulation in mitochondrial genes, COX2 and ND2, as well as genes involved in immune activation in multiple cell types. Cell-cell crosstalk analysis indicated that IBP6 + fibroblasts were the main signal senders at D30, whereas IBP6 - fibroblasts assumed this role at the other stages. NKT cells established interactions with epithelial cells and IBP6 + fibroblasts in the D730 cecum through mediation of GZMA-F2RL1/F2RL2 pairs. This study provides valuable insights into cellular heterogeneity and function in the pig cecum at different development stages.

Microplastics pollution: Economic loss and actions needed.

•Microplastic pollution threats environmental and human health.•The resolution of End Plastic Pollution promotes the global strategy against plastic pollution.•The governments should launch relevant policies to implement this resolution.

Effect of Stabilizers and Thermoplastic Polyurethane on the Properties of Three-Dimensional Printed Photochromic Wood Flour/Polylactic Acid Composites.

This study was aimed at investigating the photofatigue resistance and mechanical properties of photochromic wood-plastic composites using a stabilizer complex-AH (antioxidant 1010 and hindered amine light stabilizer HALS 770)-with different contents of thermoplastic polyurethane (TPU), which was prepared by the melt-blending extrusion process and three-dimensional (3D) printing. Photofatigue resistance, mechanical property, microtopography, and thermal analyses of 3D printed samples were performed. The results showed that the difference in surface color of composites improved by 26.7% with addition of AH after 10 days of accelerated aging, whereas the mechanical strength decreased. Upon adding TPU, composites' impact strength significantly increased by 25.48% and 87.87% with 10% and 20% addition, respectively. Meanwhile, the interface compatibilities between the components were enhanced. The differential scanning calorimetry and thermogravimetric analysis results indicated that 10% TPU could improve the thermal stability of composites.

Single-cell dynamics of liver development in postnatal pigs.

The postnatal development of the liver, an essential organ for metabolism and immunity, remains poorly characterized at the single-cell resolution. Here, we generated single-nucleus and single-cell transcriptomes of 84,824 pig liver cells at four postnatal time points: day 30, 42, 150, and 730. We uncovered 23 cell types, including three rare cell types: plasmacytoid dendritic cells, CAVIN3+IGF2+ endothelial cells, and EBF1+ fibroblasts. The latter two were verified by multiplex immunohistochemistry. Trajectory and gene regulatory analyses revealed 33 genes that encode transcription factors associated with hepatocyte development and function, including NFIL3 involved in regulating hepatic metabolism. We characterized the spatiotemporal heterogeneity of liver endothelial cells, identified and validated leucine zipper protein 2 (LUZP2) as a novel adult liver sinusoidal endothelial cell-specific transcription factor. Lymphoid cells (NK and T cells) governed the immune system of the pig liver since day 30. Furthermore, we identified a cluster of tissue-resident NK cells, which displayed virus defense functions, maintained proliferative features at day 730, and manifested a higher conservative transcription factor expression pattern in humans than in mouse liver. Our study presents the most comprehensive postnatal liver development single-cell atlas and demonstrates the metabolic and immune changes across the four age stages.

Design of sustainable 3D printable polylactic acid composites with high lignin content.

In this study, we report the development of a sustainable polymer system with 50 wt% lignin content, suitable for additive manufacturing and high value-added utilization of lignin. The plasticized polylactic acid (PLA) was incorporated with lignin to develop the bendable and malleable green composites with excellent 3D printing adaptability. The biocomposites exhibit increases of 765.54 % and 125.27 % in both elongation and toughness, respectively. The plasticizer enhances the dispersion of lignin and the molecular mobility of the PLA chains. The good dispersion of lignin particles within the structure and the reduction of chemical cross-linking promote the local relaxation of the polymer chains. The good local relaxation of the polymer chains and the high flexibility allow to obtain a better integration between the printed layers with good printability. This research demonstrates the promising potential of this composite system for sustainable manufacturing and provides insights into novel material design for high-value applications of lignin.

Sputtering of Molybdenum as a Promising Back Electrode Candidate for Superstrate Structured Sb2 S3 Solar Cells.

Sb2 S3 is rapidly developed as light absorber material for solar cells due to its excellent photoelectric properties. However, the use of the organic hole transport layer of Spiro-OMeTAD and gold (Au) in Sb2 S3 solar cells imposes serious problems in stability and cost. In this work, low-cost molybdenum (Mo) prepared by magnetron sputtering is demonstrated to serve as a back electrode in superstrate structured Sb2 S3 solar cells for the first time. And a multifunctional layer of Se is inserted between Sb2 S3 /Mo interface by evaporation, which plays vital roles as: i) soft loading of high-energy Mo particles with the help of cottonlike-Se layer; ii) formation of surficial Sb2 Se3 on Sb2 S3 layer, and then reducing hole transportation barrier. To further alleviate the roll-over effect, a pre-selenide Mo target and consequentially form a MoSe2 is skillfully sputtered, which is expected to manipulate the band alignment and render an enhanced holes extraction. Impressively, the device with an optimized Mo electrode achieves an efficiency of 5.1%, which is one of the highest values among non-noble metal electrode based Sb2 S3 solar cells. This work sheds light on the potential development of low-cost metal electrodes for superstrate Sb2 S3 devices by carefully designing the back contact interface.

Simulation of highly efficient GeSe-based solar cells with SCAPS-1D.

Recently GeSe has developed as a promising light harvesting material by enjoying to its optical and electrical features as well as earth-abundant and low-toxic constituent elements. Nevertheless, the power conversion efficiency of GeSe-based solar cells yet lags far behind the Shockley-Queisser limit. In this work, we systematically designed, simulated and analyzed the highly efficient GeSe thin-film solar cells by SCAPS-1D. The influence of thickness and defect density of light harvest material, GeSe/CdS interface defect density, electron transport layer (ETL), electrode work function and hole transport layer (HTL) on the device output are carefully analyzed. By optimizing the parameters (thickness, defect, concentration, work function, ETL and HTL), an impressive PCE of 17.98% is delivered along with Jsc of 37.11 mA/cm2, FF of 75.53%, Voc of 0.61 V. This work offers theoretical guidance for the design of highly efficient GeSe thin film solar cells.

Umbilical artery ultrasound haemodynamics combined with serum adiponectin levels can aid in predicting adverse pregnancy outcomes in patients with severe pre-eclampsia.

Severe pre-eclampsia is a leading cause of maternal and perinatal morbidity and mortality. This retrospective study explored pregnancy outcome predictive values of umbilical artery Doppler with serum adiponectin in severe pre-eclampsia. Fasting elbow venous blood was collected from 118 severe pre-eclampsia patients [maternal systolic pressure ≥ 160 mmHg and/or diastolic pressure ≥ 110 mmHg + minimal proteinuria, 56; mild hypertension + heavy proteinuria (≥2 g/24 h or random urinary protein ≥ 2+), 42; no proteinuria but new-onset hypertension + diseases of heart/lung/liver/kidney/other organs or abnormalities in blood/digestive/nervous systems, placental foetus involved, 20] and 90 controls (18.5-24.9 kg/m2) in the first morning of admission. Serum adiponectin and resistance/pulsatility indexes were separately measured and correlatively analysed by Pearson's coefficient analysis. Adverse outcomes included maternal primary postpartum haemorrhage and placental abruption, neonatal asphyxia, low birth weight, foetal distress, foetal growth restriction. In severe pre-eclampsia, serum adiponectin (downregulated) was negatively-correlated with resistance/pulsatility indexes (upregulated). The area under the curve of umbilical artery Doppler with serum adiponectin for predicting adverse outcomes of severe pre-eclampsia was 0.6545 (specificity 60.27%, sensitivity 60.00%). In conclusion, umbilical artery Doppler with serum adiponectin predicts adverse pregnancy outcomes in severe pre-eclampsia.Impact statementWhat is already known on this subject? Sad levels were lowered in sPE patients. UA ultrasound hemodynamic parameters can predict adverse pregnancy outcomes.What do the results of this study add? Our study revealed that ultrasonic hemodynamic indexes of UA combined with Sad levels had better efficacy in predicting pregnancy outcomes in patients with sPE, and our study is expected to improve the accuracy of clinical prediction of adverse outcomes in sPE patients.What are the implications of these findings for clinical practice and/or further research? Through the combined detection of multiple indicators of the foetus in the mother, our study expects to be able to monitor and predict the growth of the foetus in the mother more accurately in clinical practice, avoid excessive intervention or untimely intervention, and reduce the incidence of perinatal adverse pregnancy outcomes.

Tulsi (Ocimum sanctum) mediated Co nanoparticles with their anti-inflammatory, anti-cancer, and methyl orange dye adsorption properties.

Nanotechnology is an emerging technology that uses medicinal plants to extract nanoparticles for conventional applications. In the present investigation, the medical plant Tulsi (Ocimum sanctum) has used in the synthesis of cobalt (Co) nanoparticles in a cost-effective, feasible process. The efficiency of nanoparticles in removing methyl orange dye was evaluated by analyzing their applications in wastewater treatment. An analysis of the anti-inflammatory and anti-cancer properties of Tulsi-mediated Co nanoparticles was conducted to examine their medical application. Morphological analysis of Co nanoparticles showed that the synthesized nanoparticles were in crystal shape with a mean particle size of 110 nm. A batch adsorption study has shown that incubation periods of 5 h, pH 2, temperatures of 70 °C, and adsorbent dosage of 125 µg/mL are optimal for removing methyl orange dye from wastewater. To examine the anti-inflammatory properties of Tulsi-mediated Co nanoparticles, protein denaturation and nitric oxide scavenging assays were performed. The maximum anti-inflammatory response was recorded at a concentration of 250 µg/mL of Co nanoparticles. MTT assays against MDA-MB-231 human breast cancer cells were used to evaluate the anti-cancer properties of Co nanoparticles. This study investigates the economical extraction of Co nanoparticles from tulsi and its potential use in wastewater purification and biomedical applications.

Developmental dynamics of the single nucleus regulatory landscape of pig hippocampus.

The hippocampus is a brain region associated with memory, learning and spatial navigation, its aging-related dysfunction is a common sign of Alzheimer's disease. Pig is a good model for human neurodegenerative disease, but our understanding of the regulatory program of the pig hippocampus and its cross-species conservation in humans remains limited. Here, we profiled chromatin accessibility in 33,409 high-quality nuclei and gene expression in 8,122 high-quality nuclei of the pig hippocampus at four postnatal stages. We identified 510,908 accessible chromatin regions (ACRs) in 12 major cell types, among which progenitor cells such as neuroblasts and oligodendrocyte progenitor cells showed a dynamic decrease from early to later developmental stages. We revealed significant enrichment of transposable elements in cell type-specific ACRs, particularly in neuroblasts. We identified oligodendrocytes as the most prominent cell type with the greatest number of genes that showed significant changes during the development. We identified ACRs and key transcription factors underlying the trajectory of neurogenesis (such as POU3F3 and EGR1) and oligodendrocyte differentiation (RXRA and FOXO6). We examined 27 Alzheimer's disease-related genes in our data and found that 15 showed cell type-specific activity (TREM2, RIN3 and CLU), and 15 genes displayed age-associated dynamic activity (BIN1, RABEP1 and APOE). We intersected our data with human genome-wide association study results to detect neurological disease-associated cell types. The present study provides a single nucleus-accessible chromatin landscape of the pig hippocampus at different developmental stages and is helpful for the exploration of pigs as a biomedical model in human neurodegenerative diseases.

Dysbiosis of the gut microbiome in elderly patients with hepatocellular carcinoma.

Fecal samples from participants aged 60-80 were collected and sequenced by a high-throughput second-generation sequencer to explore the structural composition of gut microbiota in elderly patients with hepatocellular carcinoma(HCC). Comparison of gut microbiota between patients with hepatocellular carcinoma and healthy controls, α diversity and ß diversity were statistically different. At the genus level, compared with the normal group, the abundance of A Blautia, Fusicatenibacter, Anaerostipes, Lachnospiraceae_ND3007_group, CAG-56, Eggerthella, Lachnospiraceae_FCS020_group and Olsenella were decreased significantly in the LC group. In contrast, the abundance of Escherichia-Shigella, Fusobacterium, Megasphaera, Veillonella, Tyzzerella_4, Prevotella_2 and Cronobacter increased significantly. The KEGG and COG pathway analyses showed that the dysbiosis of gut bacteria in primary liver carcinoma is associated with several pathways, including amino acid metabolism, replication and repair, nucleotide metabolism, cell motility, cell growth and death, and transcription. Age is negatively associated with the abundance of Bifidobacterium. Lachnospiraceae_ ND3007_ group, [Eubacterium]_hallii_group, Blautia, Fuscatenibacter and Anaerostipes are negatively correlated with ALT, AST and GGT levels (p < 0.05), respectively. Alpha-fetoprotein (AFP) is positively associated with the abundance of Erysipelatoclostridium, Magasphaera, Prevotella 2, Escherichia-Shigella, Streptococcus and [Eubacterium]_eligens_group (p < 0.05), respectively. A random forest model showed that the genera Eggerthella, Anaerostipes, and Lachnospiraceae_ ND3007_ group demonstrated the best predictive capacity. The area under the Receiver Operating Characteristic Curve of Eggerthella, Anaerostipes and Lachnospiraceae_ ND3007_ group are 0.791, 0.766 and 0.730, respectively. These data are derived from the first known gut microbiome study in elderly patients with hepatocellular carcinoma. Potentially, specific microbiota can be used as a characteristic index for screening, diagnosis, and prognosis of gut microbiota changes in elderly patients with hepatocellular carcinoma and even as a therapeutic clinical target.

Effects of Lysine on the Interfacial Bonding of Epoxy Resin Cross-Linked Soy-Based Wood Adhesive.

Soy protein isolate (SPI) is an attractive natural material for preparing wood adhesives that has found broad application. However, poor mechanical properties and unfavorable water resistance of wood composites with SPI adhesive bonds limit its more extensive utilization. The combination of lysine (Lys) with a small molecular structure as a curing agent for modified soy-based wood adhesive allows Lys to penetrate wood pores easily and can result in better mechanical strength of soy protein-based composites, leading to the formation of strong chemical bonds between the amino acid and wood interface. Scanning electron microscopy (SEM) results showed that the degree of penetration of the S/G/L-9% adhesive into the wood was significantly increased, the voids, such as ducts of wood at the bonding interface, were filled, and the interfacial bonding ability of the plywood was enhanced. Compared with the pure SPI adhesive, the corresponding wood breakage rate was boosted to 84%. The wet shear strength of the modified SPI adhesive was 0.64 MPa. When Lys and glycerol epoxy resin (GER) were added, the wet shear strength of plywood prepared by the S/G/L-9% adhesive reached 1.22 MPa, which increased by 29.8% compared with only GER (0.94 MPa). Furthermore, the resultant SPI adhesive displayed excellent thermostability. Water resistance of S/G/L-9% adhesive was further enhanced with respect to pure SPI and S/GER adhesives through curing with 9% Lys. In addition, this work provides a new and feasible strategy for the development and application of manufacturing low-cost, and renewable biobased adhesives with excellent mechanical properties, a promising alternative to traditional formaldehyde-free adhesives in the wood industry.

Using phenotypic and genotypic big data to investigate the effect of muscle fiber characteristics on meat quality and eating quality traits in pigs.

Determining genetic correlations (GCs) between phenotypes that can be replicated across breeds or generations is important for animal breeding. A comprehensive and objective evaluation of this is dependent on enough variations in the studied phenotypes. To this end, we constructed a worldwide distributed eight-breeds crossbreed mosaic pig population and estimated the genetic and phenotypic correlations of muscle fiber characteristics (MFCs) with meat quality and eating quality traits using F6 and F7 generations (∼590 samples/generation) of this population. The GCs of the density of type IIA fibers and type IIB fibers with the loin-eye area, a*, color score, firmness score, and those of the proportions of the two fiber types with pH24h and b* were moderate to high (|rg| ≥ 0.3) in both populations. We also obtained moderate to high GCs of mean fiber density with five sensory quality traits. Our results provide an important reference for improving meat quality through the genetic regulation of MFCs.

Changes in the relationship between vapour pressure deficit and water use efficiency with the drought recovery time: A case study of the Yellow River Basin.

Drought is a major driver of interannual variability in the gross primary productivity (GPP) of global terrestrial ecosystems, and drought recovery time has been widely used to assess ecosystem responses to drought. However, the response of the carbon-water coupled cycle to drought, especially changes in the correlation between drought intensity and carbon-water coupling throughout the recovery time, remains unclear. In this study, the Yellow River Basin (YRB) located mostly in drylands was the study area. We assessed the correlation between the standardized water vapour pressure deficit (VPD) and the water use efficiency of ecosystems (WUEe) and water use efficiency of canopies (WUEc) every month with the drought recovery time of GPP. We found that the drought intensity in the middle reach of the YRB (MYRB) was greater and the drought recovery time was longer than those in the upper reach (UYRB) and lower reach (LYRB) during the period from 2003 to 2017. In terms of the correlation between drought intensity and carbon-water coupling, the greater the VPD was, the lower the WUEc. In addition, the correlation of WUEc with VPD was higher than that of WUEe in most areas of the YRB, especially in the LYRB. On the watershed level, the correlation between the two types of WUE and VPD increased gradually with the recovery time, while the correlation between WUEc and VPD (mostly negative) changed more than the correlation between WUEe and VPD (mostly positive). Therefore, the response of WUEc to meteorological drought should be given more attention, especially during the middle and late stages of drought, since it exhibited an opposite signal compared to that of WUEe during drought recovery.